Search
Filters
Close

APC Back-UPS Pro Line-Interactive BR900GI 900VA, 8 x C13 IEC Outlets, Black

Power-Saving Back-UPS Pro 900, 230V
SKU: 480-0098
Manufacturer part number: BR900GI
EAN: 0731304279594
Brand: APC
Availability: 73 available to order

  Available for next day delivery

  Collection available in 2-3 working days

Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Power-saving outlets Automatically cuts power to idle equipment to conserve electricity. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Serial Connectivity Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power and UPS conditions. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) USB connectivity Provides management of the UPS via a USB port (not available on all models). Serial Connectivity Provides management of the UPS via a serial port. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Building Wiring Fault Indicator This LED informs users of potentially dangerous wiring problems in the wall circuit. Adjustable voltage sensitivity Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications. Battery replacement without tools Allows quick, easy battery replacement. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.

Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Power-saving outlets Automatically cuts power to idle equipment to conserve electricity. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Serial Connectivity Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power and UPS conditions. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) USB connectivity Provides management of the UPS via a USB port (not available on all models). Serial Connectivity Provides management of the UPS via a serial port. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Building Wiring Fault Indicator This LED informs users of potentially dangerous wiring problems in the wall circuit. Adjustable voltage sensitivity Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications. Battery replacement without tools Allows quick, easy battery replacement. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.

Products specifications
Power
Output frequency regulation 50/60
Output power 540 W
Input operation voltage (min) 156 V
Input operation voltage (max) 300 V
Power supply input frequency 50/60
Surge energy rating 613 J
Maximum current 8 A
Efficiency 97.4%
Crest factor 3:1
Output power capacity 900VA
Ports & interfaces
USB port Yes
AC outlets quantity 8 AC outlet(s)
AC outlet types C13 coupler
Number of output IEC jumpers 2
Battery
Battery life (max) 5 year(s) h
Battery capacity 157 VAh
Battery technology Sealed Lead Acid (VRLA)
Battery recharge time 8h
Typical backup time at half load 15.9 min
Typical backup time at full load 4.6min
Replacement battery cartridge APCRBC123
Hot-swap battery Yes
Cold start Yes
Automatic battery test Yes
Design
Colour of product Black
Display LCD
Performance
Hold time (min) 8ms
Hold time (max) 10ms
Audible alarm modes Low battery alarm, Overload alarm
UPS topology Line-Interactive
Waveform Sine
Automatic Voltage Regulation (AVR) Yes
Surge protection Yes
Surge protection features Digital Subscriber Line (DSL), Fax, Modem, Network, Telephone
Noise level 45dB
Audible alarm(s) Yes
Technical details
Input connections IEC-320 C14
Logistics data
Quantity per master carton 1 pc(s)
Quantity per pallet 30 pc(s)
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -15 - 45 °C
Operating relative humidity (H-H) 0 - 95%
Storage relative humidity (H-H) 0 - 95%
Operating altitude 0 - 2952.6 m
Non-operating altitude 0 - 4763.6 m
Certificates
Certification REACH, PEP, EOLI, NEMKO-GS, GOST, CE, C-Tick, KETI, TISI, A-Tick
RoHS compliance Yes
Weight & dimensions
Package width 225 mm
Package depth 487 mm
Package height 337 mm
Weight 10.7 kg
Width 100 mm
Package weight 11.7 kg
Height 250 mm
Depth 382 mm
Packaging content
Cables included USB
Manual Yes
Warranty card Yes
Software CD Yes
Packaging content 1x Detachable IEC Power Cord
Bundled software PowerChute Personal Edition
Other features
Nominal output voltage 230
Nominal input voltage 230
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Products specifications
Power
Output frequency regulation 50/60
Output power 540 W
Input operation voltage (min) 156 V
Input operation voltage (max) 300 V
Power supply input frequency 50/60
Surge energy rating 613 J
Maximum current 8 A
Efficiency 97.4%
Crest factor 3:1
Output power capacity 900VA
Ports & interfaces
USB port Yes
AC outlets quantity 8 AC outlet(s)
AC outlet types C13 coupler
Number of output IEC jumpers 2
Battery
Battery life (max) 5 year(s) h
Battery capacity 157 VAh
Battery technology Sealed Lead Acid (VRLA)
Battery recharge time 8h
Typical backup time at half load 15.9 min
Typical backup time at full load 4.6min
Replacement battery cartridge APCRBC123
Hot-swap battery Yes
Cold start Yes
Automatic battery test Yes
Design
Colour of product Black
Display LCD
Performance
Hold time (min) 8ms
Hold time (max) 10ms
Audible alarm modes Low battery alarm, Overload alarm
UPS topology Line-Interactive
Waveform Sine
Automatic Voltage Regulation (AVR) Yes
Surge protection Yes
Surge protection features Digital Subscriber Line (DSL), Fax, Modem, Network, Telephone
Noise level 45dB
Audible alarm(s) Yes
Technical details
Input connections IEC-320 C14
Logistics data
Quantity per master carton 1 pc(s)
Quantity per pallet 30 pc(s)
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -15 - 45 °C
Operating relative humidity (H-H) 0 - 95%
Storage relative humidity (H-H) 0 - 95%
Operating altitude 0 - 2952.6 m
Non-operating altitude 0 - 4763.6 m
Certificates
Certification REACH, PEP, EOLI, NEMKO-GS, GOST, CE, C-Tick, KETI, TISI, A-Tick
RoHS compliance Yes
Weight & dimensions
Package width 225 mm
Package depth 487 mm
Package height 337 mm
Weight 10.7 kg
Width 100 mm
Package weight 11.7 kg
Height 250 mm
Depth 382 mm
Packaging content
Cables included USB
Manual Yes
Warranty card Yes
Software CD Yes
Packaging content 1x Detachable IEC Power Cord
Bundled software PowerChute Personal Edition
Other features
Nominal output voltage 230
Nominal input voltage 230

*Free next working day delivery to UK mainland addresses. Shipping costs to other areas may vary.

Filter your results