These Enclosure Systems 362 Series rack cabinets are competitively-priced, floor-standing, 19 inch, steel-framed racks. Available in two widths, three depths, a range of heights and in a choice of grey or black finish, they are supplied fully assembled, with removable front and rear doors and side panels.
The racks are available in three depths, 600mm, 800mm or 1000mm. Each rack has four pillars forming the frame of the rack when fixed to the top and base frames. Horizontal cross-members fix to the pillars, front to back. Front and rear 'rack strip' mounting-profiles fix to flanges on the top and base frames, as well as the cross-members, and are adjustable through the depth of the cabinet. The mounting-profiles have two sets of perforations to take cage nuts, to fix equipment both in the open faces of the rack and accessories, such as shelves and chassis guides, inside the rack. 1U increments on each front face and are screen-printed with 'U' height measurements to aid installation.
All doors fit flush, within the cabinet, the front door is full length shatterproof smoked glass with extruded aluminum edges, inclusive of a coloured decorative trim. A single-point lock provides security, complete with a handle which sinks almost flush into the door when locked. Quick-release hinges facilitate the reversal of the opening direction of the door or it's complete removal from the frame. To the rear of the rack, on models under 26U, a full height steel door is fitted; on models 26U and above, the door is fitted between two 200mm height, blank panels - panels with ventilation slots or integrated brush-strips are available as optional accessories. On 600mm wide models, the rear doors are full-height, plain steel, complete with a cylinder lock. On 800mm wide models, the rear door consists of two 'wardrobe style' steel doors; one door locking via spring-loaded, quick-release locking pins and the other door via a single point cylinder lock. The two steel side-panels fit to the bottom of the rack and have a cylinder lock at the top.
A 'pagoda style' roof sits spaced 10mm above the top frame. This removable roof allows for the fitting or maintenance of a roof-mounted fan-tray without affecting the construction of the cabinet frame or any equipment mounted within the cabinet. On 800mm wide models the roof has an integrated, brush-strip entry-point on each side. The bottom frame includes a large cable-entry point, with an integrated, rubber-edged, sliding-plate to hold cables in place and prevent dust ingress. Racks are supplied fitted with standard-duty 'transit' castors, 400kg maximum load per set of four.
The 800mm wide cabinets offer considerable space at either side of the mounting profiles, which are mounted on spacers to the horizontal cross-members and top and base frames. Optional, vertical, wire-mesh cable-management frames, complete with aluminium covers, can be front-mounted to the spacer blocks.
|Internal height||External height (mm) (1)|
Note (1): Height without castors, levelling feet or plinth. Add 30mm when using levelling feet, 80mm when using Standard Castor Set and 100mm when using a modular plinth.
|Maximum depth for equipment:
||Nominal depth minus 20mm.
||600kg with or without levelling feet, 400kg with standard castors, 600kg with heavy duty castors.
||Light grey, RAL 7035, or black, RAL 9005, powder coat.